A $99 diagnostic, waived with the repair, and a firm written quote before any work begins. Most repairs land between $135 and $1,080.
We charge a flat $99 diagnostic for the visit, which covers a full inspection and identification of the fault. Once we know exactly what is wrong you get a firm, written quote before any work starts — never a surprise bill afterwards.
If you go ahead with the repair on that same visit, the $99 is waived entirely. Component-level work — sensors, boards, fans, igniters, valves — is the large majority of what we do. Sealed-system and compressor jobs sit well above that, which is why they are listed separately rather than buried in an average.
Planning ranges, not quotes. Where your repair lands inside a range depends on the brand, the model, and which specific component turns out to be at fault — all of which the diagnostic settles before you commit to anything.
| Symptom | Typical range | Usually comes down to |
|---|---|---|
| Diagnostic / service call | $99 | Waived when you go ahead with the repair |
| Refrigerator not cooling | $310–$950 | Evaporator fan, defrost circuit, thermistor or control fault |
| Ice maker not working | $235–$715 | Fill valve, module, or a frozen supply line |
| Door or drawer not sealing | $205–$510 | Gasket, hinge alignment, or a panel-ready door out of true |
| Wine column not holding temperature | $345–$1,195 | Damper, sensor, or a dual-zone control fault |
| Compressor / sealed system | $1,250–$3,100 | Includes licensed refrigerant handling and pressure testing |
| Oven not heating | $255–$690 | Bake or broil element, igniter, or thermostat |
| Burner won’t ignite | $185–$440 | Igniter, spark module, or a clogged orifice |
| Condenser clean-down after monsoon | $135–$295 | Packed coils stop shedding heat — shows up as constant running |
| Induction element or power fault | $320–$950 | Element, power board, or a failed cooling fan |
| Dishwasher won’t drain | $190–$475 | Pump, check valve, or a blocked drain path |
| Dishwasher leaking | $215–$545 | Door seal, sump gasket, or a cracked fitting |
| Error code / control board fault | $275–$1,080 | Board, harness, or the sensor the board is reading |
$99 diagnostic, waived with the repair. Same-day across Phoenix.
*SubZero Repair Phoenix is an independent repair company and is not affiliated in any way with Sub-Zero, Inc., Wolf Appliance, Inc., or any of their distributors. We are not a factory service provider and specialize exclusively in out-of-warranty appliance repairs.